Description:

Quick Details

Specifications

one component polyurethane joint sealant is suitable for most building joints, including perimeter caulking of doors and windows

one component polyurethane joint sealant

1.      TECHNICAL DATA SHEET⁽¹⁾:

 Note:

(1)All data above ware tested under standardized condition.

(2)All data listed in the chart were series; please refer to the related datasheet for special items.

(3)Stretch modulus is here is for 60% modulus.

(4)Storage condition has a direct impact to the products’ shelf life, Please refer to the instruction for special items’ storing.

2.      DESCRIPTION:

Lejell 210 is a one component gun grade polyurethane based construction sealant, it is of low modulus and cures by reaction with atmospheric moisture to form a soft rubber like material with excellent elastic and adhesion strength.

3.      USES:

Lejell 210 is suitable for most building joints, including perimeter caulking of doors and windows.

* Expansion joints.

* Joints in pre-cast panel.

* External walling,curtain wall joints.

* skylights, smoke vents.

* other structural sealing for areas with structure movement. 

4.      ClEANING:

Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be  cleaned.

5.      PACKAGING:

* 310ml cartridge, 20 pcs/carton

* 600ml/400ml sausage, 20 pcs/carton

6.      APPLICATION:

Minimum application temperature: 5°C.

Lejell 210 should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply Lejell 210 in a continuous bead using enough pressure to properly fill the gaps.

7.      ADVANTAGES:

* Mildew proofing, Meet national standard for sealing of drinking water pipe.

* One component, no need of mixing.

* Easy for applying.

* Highly elasticity and low modulus.

* Excellent durability, weathering resistance..

* Self bonding, easily for repairing.

* Three kinds of colors available.

* 600, 400 cc aluminum foil packaging, 310 cartridge package for choice.

* Can be painted.

8.      ADVICE:

* For common occasion, after cleaning out the surface with organic solvent, this product can be used directly.

* Please construct by application instructions strictly, failure of stickiness may be caused by any operation disobeying construction techniques.

* This product is innocuous after curing completely, but before set, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. See doctor immediately if it is serious.