Description:

Packaging & Delivery

Specifications

Bead Inductors series !

• Low profile power inductor
• Low DCR SMD power inductor
• Large current SMD power inductor
• SMD magnetically shield power inductor
• Shielded SMD power chip inductor
• Magnetic shielded surface mount inductor with high current rating
• Low profile and shielded very effective in space-conscious applications
• Low resistance to deep power loss (minimum)
• Operating temperature: -40 to 105°C (contain heating coil)
• Appearance inspection: no external defect by visual inspection
• Terminal strength: after soldering, between copper plate and terminals of coil, push in two directions of X, Y with standing as below conditions
• Terminal should not peeled off
• Heat endurance of re-flow soldering: 240
• Insulating resistance: over 100MΩ at 100V DC between wire and core
• Dielectric strength: no dielectric breakdown at 100V DC for one minute between wire and core
• Temperature characteristic: inductance coefficient (0 to 2,000) x 10 to 6/ (-25 to 80°C) inductance deviation within ± 5.0%, after 96hrs
• Humidity characteristic: in 90 to 95% RH relative humidity at 40 ±2 RH and one hour drying under normal condition
• Inductance deviation within ± 5.0% after vibration for one hour
• Vibration resistance: each of three orientations at sweep vibration (10 to 55 to 10Hz) with 1.5mmp-p amplitude