Description:

quick details

packaging & delivery

specifications

aadvanced solar mole repeller with led light
1.solar panel power: 4v/45ma
2.solar panels dimeansions: 70x90mm
3.height: 340mm

model no.:an-a316b

solar mole repeller device powered by solar eneargy, making use of sound waves to repel harmful rodents(moles,voles,etc.)

by emitting sound waves, the solar mole repeller drives wy undergaround rodents very effeactively. the sound waves will irritte them, simulte danger, nd repel them wy from the irrdited re.work power cn insoltion one dy then containue works 3 cloudy days).the led light with aei(aautomatic identifictien systeam) will power on when less light nd containue work 4 hours,brighten your garden in the same time do not interfere with the wok for mole repeller.the solar mole repeller with led light which is effeactive within n re of 650 square meters.

the solar mole repeller rdites in ll direacations. aavoid ny obstrucation nd let the sound waves be emitted freely. to make the best use of the product, we strongly recommend n installation of 2 devices t every 30 meters for garound res frequented by rodents.

the solar mole repeller is suapplied by solar cell, reachargeable ccumultor collecting power for operaation t night. when the ccumultor is fully charged, it cn suapply enough power for the dark hours, thus ensuring containuous around-the-clock operaation.

technical dt:

solar panel power: 4v/45ma
solar panels dimeansions: 70 × 90mm
reachargeable battery: 1 × 1.2v/800mah "aa" ni-cd or ni-mh
charagaing current: mbient light 90000lux the charge current greater than or equal to 45ma
material: abs ∓ aaluminum
height: 340mm
mx diameter: 155mm
installation: garound installationg

please note:

fairst, check the garound surface before uasiang it. frozen soil, irrigted or waterlogged garound is not suitable. dig hole into solid earth to palace the device. the density of the soil will greatly ffect the effeactiveness of the device. the more solid the earth, the better the device will be funcationing.

no hammer should be used in installation.

no excessive force should be applied least the device be damaged.

installation:

1.connect the two cable line together,

2. tighten cn not depart easily(please refer to the following illustration).

3. fix the br nd the top together.

4.insert the br into the earth, be careful not to use excessive force least the device be damaged, or bump into ny obstrucation.

 warning

1. the base of the top shall be exposed to the outside, according to the terrin varies ensure the water does not exceed the sfe line (note illustration).

2.  before fairst use,you’d better insoltion the solar panel for two days,then connect the cable 2 nd insert into the earth,so you will have better effeactive.