Quick Details

Packaging & Delivery

Specifications

Butane Gas Torch Dental torch WS502C
1. DIY assembling
2. CE certificate
3. Wide range of applications

Butane Gas Torch Dental torch WS502C

This new torch is a good quality metal gas torch with push button `piezo` ignition and a small, easily controllable flame (up to 1300°C).

It also has a safety feature so that the torch cannot be accidentally lit when the safety lock is applied.

Working time: approx. 120 mins
Flame adjustment: 12mm - 32mm

Specifications:

Packing Specifications of carton :

Instructions:

A. ASSEMBLY

1. 1. Turn control knob to closed “-” (off) position.
2. 2. Change or reconnect the gas cartridge outside and away from other people
3. 3. Align cartridge collar notch with locator tab on the torch and keeping the cartridge upright, push down gently and twist the unit 35 degrees on the right.
4. 4. Be sure to check there is no gas leaking.

B.IGNITION

Turn the knob slowly in the “+” direction to start gas flowing then press the “PUSH” button in the center of the control knob until it clicks.

C.USE

1. Adjust the flame between “-” and “+” (low and high heat) position as required.

2.2 minutes for warm-up period

3. Keep the tab to the top in order to reduce flaring

D. SHUT OFF

1. Close gas supply off completely by turning gas control knob in the “-” direction.

2. Separate the appliance from the gas cartridge after use.