Quick Details

Packaging & Delivery

Specifications

Die stamp with sandblast badge
1.Copper;
2.Die stamp process;
3.Fill enamel color after plating;
4.Great looking.

Die stamp with sandblast badge

Material: Copper;
Enamel: Soft Enamel or without (liquid)
Standard Thickness:1.2 mm to 3.0 mm
Plating: Gold / Antique gold / Misty Gold/Silver / Antique Silver /Misty Silver/ Nickel / Black Nickel/Antique Nickel /Misty Nickel/ Brass/Antique Brass/Copper/Antique Copper/Rhodium/Dyed Black/Double Tone Plating/Silver
Epoxy Coating/Resin: With or Without
Additional Process: Laser Engraving/ Photo Engraving/Sanding/Pad Printing/ Offset Pad Printing
Attachment: Safety Pin, Butterfly Clutch, Rubber butterfly Clutch, Magnetic Disc
Standard Packing: Each piece/ poly bag
Color reference: Pantone Color Chart

Stamping Molding
Molding the metal surface to form the design.
Outline Cutting
The lapel pins are die struck from a copper surface. A die is created to imprint your design into the metal. The outline of the pin and any cut-outs are then cut with another mold.
Attachment
Attachment is welded on to the back of each piece

Polishing
The pins are individually hand polished until smooth and shiny.
Plating
Now plating can be processed with various plating.
Coloring
The lapel pins are individually filled by hand with enamel colors and baked to 160 degrees for proper color distribution within each lapel pin design.
Cleaning
Excess color is then wiped off from the metal surface.
Baking
The pins are placed in a low heat kiln in order to seal in the colors and achieve superb color separation.
Epoxy Coating
A clear protective epoxy coating (epoxy dome) can then be applied to the surface of your pins to protect the image from fading or peeling off or getting scratched.
Inspection
Then each pin is inspected to ensure only the highest quality is individually packaged and send for final inspection.